Resco designs, installs and integrates fire alarm and fire safety systems in Pakistan, covering detection, suppression, evacuation and voice alarm for buildings of any size.
Overview
Resco has been integrating building systems in Pakistan since 1990. Fire and life safety is one of the core disciplines it delivers, spanning stand-alone detection panels through to fully networked, addressable systems that are integrated with a building's HVAC, security and access control.
Because Resco also designs BMS, security and communication systems, a fire alarm panel it installs can trigger a coordinated response across a building: releasing access-controlled doors on egress routes, bringing CCTV cameras to relevant views, shutting down air handling on a smoke signal and pushing an automated notification to building management.
Systems
Each system below can be supplied stand-alone or as part of a wider fire and life safety design for a single building or a multi-site portfolio.
Conventional and addressable detection and control panels, sized and configured to the building and its occupancy.
Learn more →Suppression equipment and controls coordinated with detection so a confirmed alarm can trigger the correct response.
Learn more →Emergency lighting and evacuation notification design that supports safe egress when a building's normal systems are affected.
Learn more →Digital PA and voice alarm systems for general announcements and emergency broadcast, on the same network as the fire system.
Learn more →Integration
Because Resco engineers fire, security and BMS systems as one integrator, a fire event does not sit in isolation. CCTV can be used to verify an alarm before a wider response is triggered, access-controlled doors on evacuation routes can be released automatically, and building management systems can be notified so HVAC, lifts and utility monitoring respond correctly.
This integration is designed at the outset, using open, networked architecture so the fire system, security systems and BMS can exchange the signals a building's operations team actually needs during and after an incident.
Principals
Resco supplies and integrates fire and life safety equipment from established principals, including the following.
Across Pakistan
Resco delivers fire and life safety projects from its head office in Karachi and regional offices in Lahore and Islamabad, and serves clients across Pakistan.
Resco's head office is in Karachi, and the city's high-rise commercial towers and industrial facilities across SITE, Korangi and Port Qasim are a core part of its fire and life safety workload, from addressable systems in occupied towers to networked detection across industrial plant.
1st Floor, Fasih Villas, Block-4,From its regional office in Gulberg, Resco serves Lahore's commercial buildings and the city's industrial estates, where fire alarm and suppression design has to account for both occupied office space and production or warehousing areas on the same site.
Leeds Plaza, Main Boulevard,Resco's Islamabad regional office in Blue Area supports government and institutional buildings in the capital, as well as clients in Rawalpindi, where fire and life safety systems are typically specified to the project's own code and consultant requirements.
M-7, M. Gulistan Khan House 82-E,A conventional system reports an alarm by zone, while an addressable system identifies the exact device that triggered it. Resco recommends the type based on building size, occupancy and how detailed the alarm reporting needs to be, and can supply either.
Yes. Resco designs fire, security and access control as one system where required, so an alarm can be verified on CCTV and evacuation routes can unlock automatically, coordinated through the building's wider control architecture.
Resco designs and configures systems to meet the fire codes and consultant specifications set for each project. Requirements vary by building type and authority, so this is confirmed with the client and the project's consultants during design.
Yes. Resco's head office is in Karachi, with regional offices in Lahore and Islamabad, and it delivers fire and life safety projects for clients across Pakistan.
Resco offers testing and servicing and optional ongoing maintenance, alongside training on the installed system at its Karachi training facility or on site, so building teams can operate it correctly day to day.
Speak to Resco about detection, suppression, evacuation and voice alarm for a new or existing building in Pakistan.