Backbone fiber runs
Fiber connecting separate buildings, distribution rooms or floors within a site.
Fiber optic network installation in Pakistan
Resco carries out fiber optic network installation in Pakistan, building the fiber backbones that connect buildings, floors and sites where copper structured cabling alone cannot cover the distance or bandwidth required.
Overview
The backbone linking buildings, floors and sites
Fiber optic cabling is used where copper structured cabling reaches its distance or bandwidth limits, most often as a backbone linking separate buildings on a campus, connecting floors in a high-rise tower, or reaching a remote gate, warehouse or plant building from a main site. Resco carries out fiber optic network installation as part of its wider connectivity work, sizing the fiber count and route to the buildings and systems it needs to connect.
A fiber backbone is also what makes centralised CCTV and access control monitoring practical across a multi-building site, since camera and door controller traffic from a distant building can be carried back to a central server room over fiber rather than requiring local storage at every location.
- Backbone fiber between buildings on a campus or industrial site
- Inter-floor fiber for high-rise towers
- Long-distance links to gates, warehouses or remote plant buildings
- Sized to the current and expected future bandwidth requirement
Capabilities
What a Resco fiber optic installation covers
Scope depends on the distances involved and how many buildings or sites the fiber network needs to connect.
Route survey and design
Duct, tray or aerial route planned and documented before installation begins.
Splicing and termination
Fiber spliced and terminated at each end, tested for signal loss before handover.
Remote video monitoring links
Fiber connectivity supporting CCTV and access control traffic back to a central control room.
Learn more →Cisco-based network services
Switching and network configuration to carry data across the fiber backbone.
Testing and certification
Every fiber run tested for loss and certified before systems are brought live on it.
Integration
A fiber network built to carry every connected system
Resco designs fiber optic networks alongside structured cabling and the systems that depend on them.
- CCTV and access control from distant buildings carried back over fiber to a central control room
- BMS data from separate buildings consolidated onto one monitoring platform over fiber
- Structured cabling within each building connecting into the fiber backbone
- Route and capacity planned for systems added after initial installation
Principal brands
Brands behind Resco's fiber optic network work
Resco designs and installs fiber optic networks using established networking and infrastructure equipment.
Across Pakistan
Fiber optic network installation in Karachi, Lahore and Islamabad
Resco delivers fiber optic projects from its head office in Karachi and regional offices in Lahore and Islamabad.
Karachi
Resco's Karachi head office supports fiber optic installation for multi-building sites in industrial zones such as SITE, Korangi and Port Qasim, as well as fiber links between commercial towers and off-site facilities where required.
1st Floor, Fasih Villas, Block-4,F.B. Area, Karachi
+92 21 36378960–2Resco in Karachi
Lahore
From the Gulberg regional office, Resco installs fiber optic backbones for Lahore's industrial estates around Sundar and Raiwind Road, where production and warehouse buildings are often spread across a wider site.
Leeds Plaza, Main Boulevard,Gulberg 3, Lahore
+92 42 35164194Resco in Lahore
Islamabad
The Blue Area regional office covers fiber optic network installation for government and institutional campuses in Islamabad's sectors, extending to Rawalpindi, where fiber links buildings that are too far apart for copper cabling alone.
M-7, M. Gulistan Khan House 82-E,Fazal-ul-Haq Road, Blue Area, Islamabad
+92 51 2275511Resco in Islamabad
How Resco delivers
How a fiber optic network project is delivered
Resco follows the same delivery approach it uses across its connectivity work.
Survey
A route survey identifies distances, duct or tray availability and the buildings to be connected.
Design
Fiber count, route and termination points engineered to the required bandwidth and future growth.
Install and test
Fiber installed, spliced, terminated and tested for signal loss before handover.
Support
Documentation handed over, with optional ongoing maintenance and support available.
Fiber is generally used where the distance exceeds what copper structured cabling can reliably carry, or where bandwidth requirements are higher, such as connecting separate buildings on a campus or a remote gate or warehouse to a main site.
Yes. A fiber backbone is commonly used to bring CCTV and access control traffic from a distant building back to a central control room, so monitoring can be centralised rather than requiring local equipment at every location.
Cost depends on the distance between buildings, whether new duct or tray needs to be installed, the fiber count required, and the network equipment needed at each end. Resco prices projects after a route survey.
Yes. Resco tests every fiber run for signal loss and certifies it before systems are brought live, so faults are identified before they affect CCTV, BMS or other traffic running over the network.
Yes. Resco has regional offices in Lahore and Islamabad in addition to its Karachi head office, and delivers fiber optic network installation for clients across Pakistan.
Get a fiber optic network proposal
Talk to Resco about a fiber optic backbone for your site in Karachi, Lahore, Islamabad or elsewhere in Pakistan.