Design and engineering
Suppression zoning and control logic engineered against the building's layout and the areas it protects.
Fire suppression systems in Pakistan
Resco designs, installs and integrates fire suppression systems in Pakistan, coordinated with fire alarm detection so suppression activates in response to a confirmed alarm.
Overview
Suppression coordinated with detection
A fire suppression system is only as effective as the detection and control logic behind it. Resco designs suppression as part of a building's wider fire and life safety architecture, so activation is coordinated with the fire alarm panel rather than sitting on its own.
Because Resco also delivers fire alarm, emergency lighting and BMS integration, a suppression system it designs can be tied into building-wide notification, HVAC shutdown and access control on evacuation routes, giving building management one coordinated response rather than several separate ones.
- Suppression coordinated with the building's fire alarm panel
- Design matched to occupancy and the areas being protected
- Modular, networked control consistent with the rest of the fire system
- Integration with HVAC shutdown and evacuation notification
Approach
What Resco covers in a suppression project
Scope depends on the building, its occupancy and the areas being protected, and typically includes the following.
Coordination with detection
Suppression release logic tied to the fire alarm panel so activation follows a confirmed alarm.
Control panel integration
Suppression controls networked into the same architecture as the building's fire alarm system.
Installation and commissioning
Installation managed on site with quality checks at each stage, followed by system commissioning.
Integration with the BMS
HVAC and utility monitoring coordinated through the BMS when suppression activates in a protected area.
Training and support
Operation training for building teams, plus optional ongoing testing and servicing.
Integration
Suppression as part of a coordinated fire response
Resco engineers suppression alongside the building's other fire and life safety and BMS systems.
- Activation coordinated with the fire alarm panel's confirmed alarm logic
- HVAC and air handling shut down through the BMS in the affected area
- Building management notified automatically when suppression activates
- Access-controlled evacuation routes released in coordination with the fire alarm system
- A single networked architecture shared with the building's other fire systems
Principals
Fire suppression brands supplied by Resco
Resco supplies and integrates fire suppression equipment from these principals.
Across Pakistan
Fire suppression systems in Karachi, Lahore and Islamabad
Resco delivers fire suppression projects from its head office in Karachi and regional offices in Lahore and Islamabad.
Karachi
Karachi's industrial zones across SITE, Korangi and Port Qasim, alongside its high-rise commercial towers, give Resco's Karachi head office a wide range of suppression projects, from plant and warehousing to occupied office space.
1st Floor, Fasih Villas, Block-4,F.B. Area, Karachi
+92 21 36378960–2Resco in Karachi
Lahore
From its Gulberg office, Resco designs suppression systems for commercial buildings and industrial estates around Lahore, coordinated with the fire alarm systems already installed or specified for the same sites.
Leeds Plaza, Main Boulevard,Gulberg 3, Lahore
+92 42 35164194Resco in Lahore
Islamabad
Resco's Islamabad regional office in Blue Area supports suppression projects in government and institutional buildings in the capital and in Rawalpindi, engineered to each project's own specified requirements.
M-7, M. Gulistan Khan House 82-E,Fazal-ul-Haq Road, Blue Area, Islamabad
+92 51 2275511Resco in Islamabad
How Resco delivers
How a fire suppression project is delivered
Resco follows a consistent delivery approach across its fire and life safety work.
Assessment
A review of the building and the areas requiring suppression, alongside any existing fire alarm infrastructure.
Design and engineering
Suppression zoning, control logic and coordination with the fire alarm panel engineered for the project.
Installation and commissioning
Installation managed with project oversight and quality checks, followed by commissioning of the system.
Integration and support
Integration with the BMS and fire alarm system, plus training and optional ongoing maintenance.
Suppression is designed to work with detection, so it is generally installed alongside a fire alarm system or coordinated with an existing one. Resco reviews what is already on site before proposing a suppression design.
Cost depends on the size and use of the areas being protected, the type of suppression specified for the project, and how much coordination with the existing fire alarm and BMS is required. Resco provides a proposal after assessment.
Yes. Resco designs suppression control logic to connect into a building's BMS where one is in place, so HVAC and utility monitoring can respond automatically when suppression activates in a protected area.
Resco designs suppression systems to meet the fire codes and consultant requirements specified for each project, confirmed with the client and their consultants during design.
Resco offers testing and servicing and optional ongoing maintenance for the systems it installs, alongside training for building teams on how to operate them.
Plan a fire suppression system
Talk to Resco about suppression design for a new or existing building in Pakistan.